INSTALL INSTRUCTIONS KK-ST-FLIP
FLIP DOWN REAR STEP OPTION
(For Rear Permanent Mount Step order with KK-x-ST-RP)
TOOLS REQUIRED:
Ratcheting wrench
Standard socket set
Open-end wrench set
Power drill
Drill bit set
HARDWARE:
QTY DESCRIPTION
PART #
10
4
32
10
4
½” x 1 ½” Hex head bolt
½” x 3 ½” Hex head bolt
½” Flat washer
½” Lock washer
½” Nylock nut
½” Hex nut
GSM33050
GSM33055
GSM31012
GSM31030
GSM30020
GSM30011
GSM30046
10
2
¼” Stainless nylock nut
SUB ASSEMBLY:
1. Confirm receipt of all parts.
2. Flip down portion of step will come assembled.
3. Slide Support Channels into the Step.
4. Bolt together using (4) ½” x 4” Hex Head Bolts, ½” Nylock Nuts, ½” Flat Washers.
Note: Be sure that flat side of Support Channels face towards outside of vehicle
INSTALLATION:
1. MOUNT FRAME BRACKETS:
• Determine Driver and Passenger side Frame Brackets using view on final page.
• Line brackets up with holes in frame rail of vehicle.
• Bolt brackets to frame using (4) ½” x 1 ½” Hex Head Bolts, ½” Hex Head Nuts,
½” Flat Washers, and ½” Lock Washers
• Do not tighten hardware at this time.
Note: FORD VANS Only: You must use a spacer between the Frame Rail and the Frame
Bracket on the forward mounting holes. Use (2) ½” Supplied flat washers
2. MOUNT STEP AND RAIL ASSEMBLY:
• Step can be mounted at various heights.
• With height determined, loosely bolt Assembly to Frame Brackets using (6)
½” x 1 ½” Hex Head Bolts, ½” Hex Head Nuts, ½” Flat Washers, and ½” Lock
Washers
3. FINAL SQUARING:
• With step square at desired height, tighten all hardware.
KK-ST-FLIP-INST-6-07
|
Greenheck Fan Ventilation Hood CSP B User Manual
Haier Flat Panel Television L15D2 A0 User Manual
Hasbro Robotics 81057 Asst User Manual
Hearth and Home Technologies Indoor Fireplace ST 36TR User Manual
Hotpoint Convection Oven RB797BBBB User Manual
Hotpoint Microwave Oven MW11P User Manual
Hotpoint Oven BS11 MK2 User Manual
HP Hewlett Packard Computer Accessories QR516B User Manual
HTC Cell Phone TOUCHPRO2SPT User Manual
Image Treadmill IMTL12901 User Manual